I am a student and facing problems in my project. I search on net and found your site very valuable but still my problem not solved. Hopefully you will responds to this mail. I have a camera of Epix Inc. which comes with a frame grabber board that has PCI interface. the camera and board is connected through a RJ45 interface. my project is to connect this camera with FPGA DE2 board. The camera operates through a software. can you tell me any good solution for this problem. I have two thinking that whether i connect PCI interface to the FPGA (very difficult in my sense as i have to control everything in this) second i connect FPGA through USB to my PC and operates camera functioning from there. can you please guide any possible solution for this.
Waiting for a favorable and prompt reply