Fast SDRAM access from peripheral

Anything about FPGA boards, like how to assemble SMD components, find low-voltage regulators, FPGA configuration...

Fast SDRAM access from peripheral

Postby rainmakergreek » Mon Jan 25, 2010 12:31 am

Hi, I am using a Xilinx Virtex-II Pro FPGA and I have created a peripheral that does some computations and needs to access data stored in the SDRAM. The problem is that it needs to send to the processor a large number of pointers to an array and receive a large number of data corresponding to these pointers (tens of KBytes in and out). This has to happen as fast as possible so that the overhead is small and the acceleration from the peripheral is worth it. The peripheral takes ~500 cycles to complete its job but the data transfer seems to take much longer.What is the fastest way to transfer the data? My initial plan is to create an interrupt every time the peripheral needs data and tell the processor to send the data. What are the services I need to activate in the custom peripheral IPIF to do this fast? Is there another way? Can I access the SDRAM directly without using the processor?
rainmakergreek
 
Posts: 1
Joined: Mon Jan 25, 2010 12:29 am

Postby Thoma HAUC » Wed Jan 27, 2010 6:52 pm

Hi rainmakergreek,

It is difficult to give you an answer.

Could you provide a synoptic of your system?
Put on this synoptic the path taken by data.

This will help to give you some hints.

Thoma
Thoma HAUC
 
Posts: 52
Joined: Thu Aug 26, 2004 4:57 am
Location: Near Paris, France


Return to General boards

Who is online

Users browsing this forum: No registered users and 2 guests

cron