this project interfaces a PIC18F452 to the PLUTO-3, FLASHY-D, COLOR LCD setup
it comminicates via RS232.

The microcontroller codes has several routines but these are the major functions
1. Acquire Analog Signals
2. Read ADC output
3. write Text to GLCD
4. Write Curves to the LCD.

The microcontroller code was written using with Mikrobasic V7.0.0.2 (www.mikroe.com)
The hardware was drawn and simulated with PROTEUS ISIS V7.4 SP3
The microcontroller was programmed with an easyPIC55 board from mikroelectronica

Eniolorunda Tosin
enmitos@yahoo.co.uk

Credits to JEAN NICOLLE
